PESCO Bill Calculator

(Estimate a Peshawar Electric Supply Company Bill)

Enter your tariff category, units and sanctioned load to estimate a PESCO bill with the 2026 NEPRA rates, 18% GST and your FPA.

Calculates from official tariff slabs + your load.
Protected (Residential)
Single Phase
Pick the category printed on your bill.
Rs
Rs
Leave at 0 unless your bill shows these.
kWh
kW
From your connection agreement — used for the fixed charge.

From your bill's 'Total FPA' line — can be negative

Rs

Optional govt relief — not the built-in Protected/Lifeline discount

Rs
📋 Applicable Tariff
Tariff Slabs
0–100 unitsRs 10.54/unit
101–200 unitsRs 13.01/unit
Other Charges
Fixed ChargeRs 0.00
Electricity DutyNone (off bills since July 2025)
GST18%
TV FeeNone (removed July 2025)
Official NEPRA rates (Feb 2026) — customize if your bill differs.

Estimated Monthly Bill

Protected
Detailed Charges
Fixed ChargeRs 0.00
GST (18%)Rs 0.00
Total Estimated BillRs 0.00

⚡ 0 units this month · avg rate Rs 0.00/unit

⚠️ This is an estimate and can be wrong — use "Enter My Bill's Amount" mode for an accurate result.
Tariff Source

NEPRA · S.R.O 279(I)/2026, February 2026

View the official NEPRA tariff guide ↗

PESCO Service Area

This PESCO bill calculator estimates a monthly bill for consumers of the Peshawar Electric Supply Company from the units used, using the residential and other tariffs notified for 2026. PESCO says it supplies more than 3.7 million consumers in the civil districts of Khyber Pakhtunkhwa through seven circles: DI Khan, Bannu, Khyber, Mardan, Peshawar, Swabi and Swat.

A Worked PESCO Bill

Take an unprotected 1 kW connection that used 120 units.

LineWorkingAmount
Energy charge120 × Rs 28.91Rs 3,469.20
Fixed charge1 kW sanctioned loadRs 300.00
GST at 18%On Rs 3,769.20Rs 678.46
Estimate before FPARs 4,447.66

Add the fuel price adjustment printed on your bill to this figure.

Where the Rates Come From

The rates are the 2026 schedule notified for all ten ex-WAPDA DISCOs, so PESCO charges the same per unit as its neighbours. The full residential slab table, with fixed charges per kW, is on the IESCO Bill Calculator page.

Bill Calculator by DISCO

All 10 ex-WAPDA DISCOs bill off the same NEPRA-notified tariff — pick yours below for a calculator pre-labelled with your company and coverage area.

Frequently Asked Questions

How do I calculate my PESCO bill?

Multiply the units by the slab rate, add the fixed charge for your sanctioned load, add 18% GST on those two, then add the FPA. For an unprotected 1 kW connection that used 120 units, that gives Rs 4,447.66 before FPA.

Which areas does PESCO cover?

PESCO says it supplies more than 3.7 million consumers in the civil districts of Khyber Pakhtunkhwa through seven circles: DI Khan, Bannu, Khyber, Mardan, Peshawar, Swabi and Swat.

Does PESCO charge a different rate in Khyber Pakhtunkhwa?

No. The per-unit rates are the same across the ten ex-WAPDA DISCOs. PESCO's bill for 120 unprotected units is the same as LESCO's or MEPCO's for the same units and load.

Are PESCO rates different from other DISCOs?

No. NEPRA's tariff for the ten ex-WAPDA distribution companies is the same for each of them. K-Electric in Karachi has its own tariff and is not covered here.

Last Updated: October 2026 | Rates from S.R.O 279(I)/2026 on IESCO's tariff guide, checked October 2026. Electricity duty and PTV fee removal from bills (July 2025) from news reports of the Power Division and Prime Minister's announcements. Service area from PESCO's website.